Select the Server option 'Run Modern IOS (IOSv or IOU), ASA and appliances from non-Cisco manufacturers' and click on Next Start the GNS3 version 2.0.0.0, and then from the Help tab click on Setup Wizard. Test the connectivity from the Command line. That’s why our VM’s IP address is 192.168.159.128, which is from the IP Address range. This GNS3 VM is connected with Vmnet1, and having the network address 192.168.159.0/24. Moreover, if you want to assign IP address as per your choice, change the DHCP network. We can check the DHCP from where the VM received the IP address. We can observe that this VM received the IP address (192.168.165.128) from the VMware DHCP, Here, I increased the RAM from 2GB to 8GB and the Processor from 1 to 2. Otherwise, you can skip it and power on the VM. It is optional, if you want to change the setting of the new VM click on 'Edit Virtual Machine Setting'. Note: Be sure that you have enough free space on your HDD for GNS3-VM, otherwise you may get the error message during installation. Select the storage path for the new GNS3 VM and click on Import. Then select the GNS3 VM.ova and click on Open button. In VMware Workstation, from the File menu click on Open In this step we will import the downloaded GNS3 VM, which is GNS3 VM.ova. VMware Workstation 11.1.0 and Window 10 is running on my machine, if you are using other version or software the graphics can be different. This is the downloaded GNS3 VM image for VMWare workstation: Install the GNS3 version 2.x , and VMware Workstation on your machine. In case if you do not have VMWare installed on your machine, you can download VMWare Workstation, before starting this exercise this should be installed on your device.Download the GNS3 VM VMWARE WORKSTATION version 2.x.Processor for import the GNS3-VM, change the setting of it, and connectivity test from the Windows.Downloading source of the software which will be required for this practical.This article will illustrate you: how we can import our GNS3-VM in the VMware Workstation and connect that GNS3-VM to the GNS3. When the New IOS Router Template opens, select “Run this IOS Router on the GNS3 VM” in the Server Type section and add the IOS image.In the new version 2.0.0 of GNS3, running the GNS3 VM is much easier as compared to the previous versions. To add Cisco Router IOS to the GNS3 VM, open Preferences and click IOS Routers under Dynamips.After configuring vCPU Cores and RAM settings, GNS3 and GNS3 VM will automatically connect. In the GNS3 VM configuration, select VMware as the virtualization platform and choose the server from the VM Name.Check the Run appliances in a virtual machine option in the Setup Wizard window and then leave the local server configuration values as they are.Click Help / Setup Wizard to connect GNS3 and GNS3 VM.After running the server, open the GNS3 software. Open the Processor and Memory settings and set a suitable value according to the capacity of your computer.Also, change the value of Troubleshooting to None to increase server performance a bit more. After importing the GNS3 server, open its settings and disable Side Channel Mitigations under Advanced.Click Continue and wait to import the virtual machine listed in Fusion.View the contents of the GNS3 VM folder in the Downloads location and select the ovf file.Click Choose File to add the GNS3 VM.ovf file on the Choose an existing virtual machine screen.Open VMware Fusion and click File / Import.Double-click the zip file in the Downloads location and extract it to the folder. The GNS3 VM virtual machine will be downloaded to your Mac as a zip.Next, download the GNS3 VM for the VMware Workstation and Fusion platform. To download the GNS3 VM, visit GNS3’s website.Install GNS3 and VMware Fusion on your macOS system from the links below before installation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |